AURAWELL – The energy-saving heating system for medical and therapeutic facilities

Stevo_modern_medical_practice_interior_wide_shot_clean_struct_e9d3dbe5-2877-4dec-958f-74ff6bcba685_1

In medical practices and therapeutic facilities, treatment rooms are often perceived as too cold – especially when patients lie still for extended periods. Exterior walls and window areas create noticeable cold zones. Underfloor heating systems react slowly, and traditional radiators cause air movement. At the same time, there are stringent hygiene requirements and limited options for renovation, particularly in rented properties.

Uniform heat for treatment rooms and therapy areas

Aurawell is an electric wall heating system with surface heat emission, which is specifically used on exterior wall and window areas.

The panels are mounted across the entire surface of the wall and, in addition to regulating the room air, also temper the adjacent wall surface. This reduces cold spots and stabilizes the temperature distribution in the room.

The system:

works silently
does not cause air circulation
does not require water pipes
It is designed to be maintenance-free.
enables precise electrical control

The installation is flush with the surface of the wall and can be integrated even where structural intervention options are limited.

The result:
Uniformly heated treatment rooms with reduced cold zones.

Calm warmth without air movement.
Integration without complex modifications.

Specific benefits of the system

Targeted heat in the treatment area

Panels can be installed behind examination tables or on exterior walls. The radiant heat acts directly on the body and increases the comfort of resting patients.

Hygienic & silent heat

The system operates without air turbulence or fans. No convection currents mean less dust movement and a calmer indoor climate.

Design integration

The panels can be individually designed and integrated into the practice’s design. They can be used with or without a heating function as part of the architectural concept.

Easy Installation

The panel is glued directly to the wall. No water-bearing systems, no floor opening, and no modifications to existing heating technology – ideal for retrofitting.

Transparent operating costs

Power consumption approx. 0.5 kW. At €0.25–0.40/kWh, operating costs are approx. €0.125–0.20 per operating hour. No maintenance or service costs.

Smart integration

Integration into timers or central building control systems is possible. Preheating before office hours and automatic temperature reduction outside of opening hours.

sustainability

With around 94% renewable electricity in the Austrian consumption mix, the system can be positioned sustainably.

Factbox

Noticeable warmth directly in the treatment area
Hygienic – no air turbulence
Silent
The panel is glued directly to the wall.
Ideal for rental spaces
No hydraulics, no pumps
Maintenance-free
Operating costs approximately €0.125–€0.20 per hour
Integration into timers / central control
Customizable – part of the practice design
Sustainable in the Austrian electricity system

Easy installation in existing buildings

Renovations while the building is occupied must be carried out cleanly and quickly.
Aurawell is glued directly to the wall across its entire surface – No pipes, no water, no costly renovations. No utility room, no piping, no major structural alterations.

The assembly process takes place:

Clean
Fast
virtually noiseless
without dirt or chiseling work

Installation is also easily possible in occupied units.

After installation: connect, adjust, done.

Many design solutions to choose from

With AURAWELL, you combine maximum comfort with modern design.
Whether simple and discreet or as a stylish highlight: The heating panels can be perfectly matched to the room design and at the same time ensure noticeable comfort.

In addition to the standard designs, there are exclusive designs for architects and project developers. additional designs to choose from.

The panels can also be painted or wallpapered!

Previous Next

1 2 3 4 5 6 7 8 9 10 11

Facts about the different Aurawell panels

More about the technology

Select decor

Order now

You can order the Aurawell heating panel online right now.

Please note that clicking the button will redirect you to the Meyer.at website. Meyer.at’s privacy policy and terms and conditions apply.

Voucher codes can be redeemed directly in the shopping cart.

Order now at meyer.at

FAQ – Frequently Asked Questions

Technology

How hot does the surface of the Aurawell panel get?

The surface temperature heats up to a maximum of 60 °C. So you cannot burn yourself if you touch the panel.

How much electricity does one panel consume?

An Aurawell panel requires approximately 0.5 kW. During the heating phase, consumption can increase to 0.6 kW. Once room temperature is reached, the panel then reduces its power consumption back to 0.5 kW.

How many panels do I need for a room?

With one Aurawell panel, you can heat a room of approx. 30 m2 to a temperature of approx. 22 degrees.

Installation

How is the panel attached?

The Aurawell panel is attached to the wall with a suitable mounting adhesive (Mapei MS Rapid). The adhesive is available in our webshop. We will send you installation instructions with the panel.

Can I install the panel myself?

Definitely, with a little manual skill. Installation is very easy, but you should have a helper. This makes it easier to glue to the wall, as the surface is quite large and the adhesive hardens quickly.

Can I drill into the panel?

Only with the Premium version with 57 volts can you drill into the panel, for example, to attach a fixture. Important: Edges or drill holes must be properly sealed!

Can I adapt (shorten) the Aurawell panel to my room height?

The Aurawell Premium version with 57 volts can be shortened as desired. Please note that the heating output will decrease with a smaller heating surface. The Aurawell Standard version with 230 V can be shortened by 28 cm at the top and bottom. These areas are unheated. You must neither cut nor drill in the heated area.

Can I glue a panel onto existing tiles?

Yes, that is easily possible. The Aurawell panel can be attached to any smooth surface with a suitable adhesive. You can order the recommended adhesive directly from our shop (Mapei MS Rapid).

Distinction from other heating systems

How does the energy-saving heater differ from an infrared heater?

Infrared heaters primarily warm objects in the room; the Aurawell energy-saving heater also warms the air, like a radiator. The radiant heat is very pleasant and comparable to a tiled stove.

Is the energy-saving heater cheaper to operate than an infrared heater?

Yes. The power consumption of the Aurawell energy-saving heater is lower than that of an infrared panel. An Aurawell panel requires approximately 0.5 kW. One panel is sufficient for a room of approx. 30 m2. Infrared panels are designed for a maximum of 15 m2.