Perfect heat control in 2 versions
Calculable
Low operating costs, low investment
For all living areas
Standard version for living spaces, premium version for shower & bath.
Smartly controllable
Control heat easily and conveniently
Low operating costs, low investment
Standard version for living spaces, premium version for shower & bath.
Control heat easily and conveniently
Technical Information:
RRP €1,890.00 (incl. VAT)
Technical information:
RRP €2,290.00 (incl. VAT)
You can order your Aurawell heating panel online now.
Please note that clicking the button will redirect you to the Meyer.at website. Meyer.at’s privacy policy and terms and conditions apply.
Voucher codes can be redeemed directly in the shopping cart.
How hot does the surface of the Aurawell panel get?
The surface temperature heats up to a maximum of 60 °C. So you cannot burn yourself if you touch the panel.
How much electricity does one panel consume?
An Aurawell panel requires approximately 0.5 kW. During the heating phase, power consumption can increase to 0.6 kW. Once room temperature is reached, the panel then reduces its power consumption to 0.5 kW.
How many panels do I need for a room?
With one Aurawell panel, you can heat a room of approx. 30 m2 to a temperature of approx. 22 degrees.
How is the panel attached?
The Aurawell panel is attached to the wall with a suitable mounting adhesive (Mapei MS Rapid). The adhesive is available in our webshop. We will send you installation instructions with the panel.
Can I install the panel myself?
Definitely, with a little manual skill. Installation is very easy, but you should have a helper. This makes it easier to glue to the wall, as the surface is quite large and the adhesive hardens quickly.
Can I drill into the panel?
Only with the Premium version with 57 volts can you drill into the panel, for example, to attach a fixture. Important: Edges or drill holes must be properly sealed!
Can I adapt (shorten) the Aurawell panel to my room height?
The Aurawell Premium version with 57 volts can be shortened as desired. Please note that the heating output will decrease with a smaller heating surface. The Aurawell Standard version with 230 V can be shortened by 28 cm at the top and bottom. These areas are unheated. You must neither cut nor drill in the heated area.
Can I glue a panel onto existing tiles?
Yes, that is easily possible. The Aurawell panel can be attached to any smooth surface with a suitable adhesive. You can order the recommended adhesive directly from our shop (Mapei MS Rapid).
How does the energy-saving heater differ from an infrared heater?
Infrared heaters primarily warm objects in the room; the Aurawell energy-saving heater also warms the air, like a radiator. The radiant heat is very pleasant and comparable to a tiled stove.
Is the energy-saving heater cheaper to operate than an infrared heater?
Yes. The power consumption of the Aurawell energy-saving heater is lower than that of an infrared panel. An Aurawell panel consumes approx. 0.5 kWh. One panel is sufficient for a room of approx. 30 m2. Infrared panels are designed for a maximum of 15 m2.