Traditional water-based systems increase technical complexity through hydraulics, pumps, manifolds, utility rooms, and interfaces between trades. Radiators interfere with architectural design, while underfloor heating systems tie the floor structure and react slowly. Furthermore, project developers face significant cost and time pressures.
Aurawell opens up new possibilities in surface design.
The heating panels are available in standard decors, but can also be customized:
become.
Furthermore, heating panels and decorative panels without a heating function can be combined, allowing entire wall surfaces to be designed homogeneously – regardless of where heat is actually needed.
The result:
A continuous mural without any discernible functional zones.
Design without technical compromises.
The panel is only 5 mm thick, is fully bonded to the surface, and requires no pipes or technical rooms. This results in a virtually invisible heating solution.
No water-carrying network, no distributors, no hydraulic balancing. This reduces planning effort, construction time, interface risks and follow-up costs.
Panels can be individually designed and integrated into corporate identity. With or without a heating function, they become part of the architectural design.
Lower investment costs, modular expandability and low-maintenance technology enable economically attractive project implementation.
With around 94% renewable electricity in the Austrian consumption mix and the possibility of combining it with photovoltaics, a sustainable overall concept is created.
Integration into smart home or building management systems enables flexible room control and energy-optimized operation.
Architecture arises from the interplay of surfaces.
Aurawell is based on a mineral SPC (Mineral Polymer Compound) core. The wall panel can be designed to match floor coverings.
Walls and floors can:
This creates spaces with a clear material and design language – without visible heating technology as a disruptive element.
Heat becomes part of the overall architectural concept.
Renovations while the building is occupied must be carried out cleanly and quickly.
Aurawell is glued directly to the wall across its entire surface – No pipes, no water, no costly renovations. No utility room, no piping, no major structural alterations.
The assembly process takes place:
Installation is also easily possible in occupied units.
After installation: connect, adjust, done.
With AURAWELL, you combine maximum comfort with modern design.
Whether simple and discreet or as a stylish highlight: The heating panels can be perfectly matched to the room design and at the same time ensure noticeable comfort.
In addition to the standard designs, there are exclusive designs for architects and project developers. additional designs to choose from.
The panels can also be painted or wallpapered!
You can order the Aurawell heating panel online right now.
Please note that clicking the button will redirect you to the Meyer.at website. Meyer.at’s privacy policy and terms and conditions apply.
Voucher codes can be redeemed directly in the shopping cart.
How hot does the surface of the Aurawell panel get?
The surface temperature heats up to a maximum of 60 °C. So you cannot burn yourself if you touch the panel.
How much electricity does one panel consume?
An Aurawell panel requires approximately 0.5 kW. During the heating phase, consumption can increase to 0.6 kW. Once room temperature is reached, the panel then reduces its power consumption back to 0.5 kW.
How many panels do I need for a room?
With one Aurawell panel, you can heat a room of approx. 30 m2 to a temperature of approx. 22 degrees.
How is the panel attached?
The Aurawell panel is attached to the wall with a suitable mounting adhesive (Mapei MS Rapid). The adhesive is available in our webshop. We will send you installation instructions with the panel.
Can I install the panel myself?
Definitely, with a little manual skill. Installation is very easy, but you should have a helper. This makes it easier to glue to the wall, as the surface is quite large and the adhesive hardens quickly.
Can I drill into the panel?
Only with the Premium version with 57 volts can you drill into the panel, for example, to attach a fixture. Important: Edges or drill holes must be properly sealed!
Can I adapt (shorten) the Aurawell panel to my room height?
The Aurawell Premium version with 57 volts can be shortened as desired. Please note that the heating output will decrease with a smaller heating surface. The Aurawell Standard version with 230 V can be shortened by 28 cm at the top and bottom. These areas are unheated. You must neither cut nor drill in the heated area.
Can I glue a panel onto existing tiles?
Yes, that is easily possible. The Aurawell panel can be attached to any smooth surface with a suitable adhesive. You can order the recommended adhesive directly from our shop (Mapei MS Rapid).
How does the energy-saving heater differ from an infrared heater?
Infrared heaters primarily warm objects in the room; the Aurawell energy-saving heater also warms the air, like a radiator. The radiant heat is very pleasant and comparable to a tiled stove.
Is the energy-saving heater cheaper to operate than an infrared heater?
Yes. The power consumption of the Aurawell energy-saving heater is lower than that of an infrared panel. An Aurawell panel requires approximately 0.5 kW. One panel is sufficient for a room of approx. 30 m2. Infrared panels are designed for a maximum of 15 m2.
