Advantages during the transition period at a glance
- Targeted heating of individual rooms or room zones
- Quickly zoneable
- Only a power connection is required.
- No hydraulics, no pumps
- Virtually maintenance-free
- 5 mm thin and fully wall-integrated
Heat exactly when it’s needed – during the transitional seasons
During the transitional seasons, many rooms are noticeably too cold – even though the central heating system is not yet in operation or is deliberately switched off. Individual rooms, exterior wall areas, or home office workstations do not reach a comfortable temperature.
Aurawell is designed as a zone, supplementary, or comfort heating system and is particularly suitable for targeted warmth where it is needed . This allows a room to be heated independently of a central system.
The typical problem during the transition period
Central heating systems often serve entire buildings or floors. Switching on the main heating system for individual rooms is often not economically or logistically practical.
At the same time, typical comfort problems arise:
- Cold exterior walls
- Noticeable cold on window surfaces
- Uneven temperature distribution
- Discomfort despite moderate room temperature
Radiant heat can significantly reduce the sensation of cold air on exterior walls and window surfaces.
Why individual rooms cool down faster
The actual heatable room size depends on several factors, including:
- Insulation standard
- Room height
- Building age
- Number of exterior walls
Rooms with multiple exterior surfaces lose heat faster and often require targeted temperature control.
Aurawell as a targeted solution
Aurawell is an electric wall heater with a surface-level heat output.
Heat transfer occurs predominantly via radiant heat, supplemented by gentle warming of the room air.
The system is:
- can be used as a primary heating system
- ideal as zone, supplementary or comfort heating
- especially suitable for targeted heat where it is needed.
Especially during the transition period, this means:
Only the room actually used is heated – not the entire building.
This is how heat affects the room
The sensation of warmth is comparable to that of a tiled stove:
- fast, direct heat
- no draft
- pleasant whole-body warmth
- Comfort even at moderate room temperatures
The heating of the wall surfaces creates a stable, even indoor climate.
The panels reach a surface temperature of approximately 55 °C after about 15 minutes.
Technical specifications
- Typical heating output per panel: approx. 600 W
- Typical power consumption: approx. 0.5 kW
- Cost per heating hour: approx. 15 cents (at 25–40 ct/kWh)
- Control via integrated room thermostat with ± 1 °C spread
Electricity consumption can be measured directly via an electricity meter at the socket.
Installation & Retrofitting
The panel is glued directly to the wall. No water systems, floor openings, or complex structural alterations are required.
The construction is only 5 mm thin and fully bonded. This makes the system particularly suitable for:
- Existing building
- Individual room solutions
- targeted comfort improvement
Heat where it’s needed.
During the transition period, Aurawell enables targeted, precisely controllable room temperature control – without having to heat the entire building.
FAQ – Frequently Asked Questions
Does the central heating system need to be running?
No. The Aurawell wall heating panel only requires an electrical connection.
How quickly is the heat noticeable?
The Aurawell panels reach their operating temperature of approximately 55 °C after about 15 minutes.
Can only a single room be heated?
Yes. The system is designed as a zoned and supplementary heating system and can be quickly zoned. Multiple panels can be easily and conveniently controlled via the app.
